Description
Easy to use
NEW Anti-Trip Technology for full no trip LOOP testing on all RCD types
Test button in probe as well as lockdown test button for ‘hands free’ testing
Easy PFC & PSC measurement without the need to alter test probes
250, 500 & 1000V insulation tests with auto discharge
Additional LED for warning of high voltage output in insulation test mode
Memory for test lead resistance compensation
Selectable touch voltage
Backlit display
Auto-test memory for RCD testing – single screen results
End of line calibration certificate included
Additional Information
Accessories
ACC064SP G7 Test remote with remote test button
ACC064 G7 Test lead set
Kamp 12 Mains lead
Batteries
Test lead pouch
Instruction Manual
Soft carry case
Calibration Certificate
Technical Specifications
Continuity
| Open Circuit Voltage (DC) | Short Circuit Current | Range | Accuracy | |
| 5V±20% | Greater than200mA | 20 / 200 / 2000ΩAuto-Ranging | 0 ~ 0.19Ω0.2 ~ 2000Ω |
±0.1Ω±(2%rdg+8dgt) |
| 2Ω Buzzer: Buzzer sounds when measured 2Ω Buzzer Accuracy: 2Ω±0.3Ω resistance is 2Ω or less. |
||||
Insulation Resistance
| Open CircuitVoltage (DC) | Rated CircuitCurrent | Range | Accuracy |
| 250V+40% -0% | 1mA or greater@ 250kΩ | 20 / 200MΩAuto-Ranging | 20 ~ 200MΩ±(5%rdg+6dgt) |
| 500V+30% -0% | 1mA or greater@ 500kΩ | 20 / 200 / 2000MΩAuto-Ranging | 200 ~ 2000MΩ±(5%rdg+6dgt) |
| 1000V+20% -0% | 1mA or greater@ 1MΩ | 20 / 200 / 2000MΩAuto-Ranging | 200 ~ 2000MΩ±(5%rdg+6dgt) |
Loop Impedance
| Function | Rated Voltage | Nominal Test Currentat 0Ω External Loop:Magnitude/Duration | Range | Accuracy |
| L-PE | 100 ~ 260V50/60Hz | 20Ω: 6A/20ms200Ω: 2A/20ms2000Ω: 15mA/360ms | 20 / 200 /2000ΩAuto-Ranging | ±(3%rdg+4dgt) |
| L-PE(ATT) | 100 ~ 260V50/60Hz | L-N: 6A/30msN-PE: 10mAapprox. 4s | 20 / 200 /2000ΩAuto-RangingL-N < 20Ω | ±(3%rdg+6dgt) |
| L-N/L-L | 100 ~ 500V50/60Hz | 20Ω: 6A/20ms | 20Ω | ±(3%rdg+4dgt) |
PSC (L-N/L-L) / PFC (L-PE)
| PSC | 100~500V50/60Hz | 6A/20ms | 2000A/20kAAuto-Ranging |
PSC accuracy is derived from measured loop impedance specification and measured voltage specification |
| PFC | 100~260V50/60Hz | 6A/20ms2A/20ms15mA/360ms | 2000A/20kAAuto-Ranging | |
| PFC (ATT) | 100~260V50/60Hz | L-N: 6A/30msN-PE: 10mA/approx. 4s | 2000A/20kAAuto-Ranging |
RCD
| Function | Rated Voltage | Accuracy | ||
| Trip Current |
Trip Time | |||
| AC Type | A Type | |||
| X1/2 | 230V+10%-15%50/60Hz | -8%~2% | ±10% |
±(1%rdg+3dgt) |
| X1 | +2%~+8% | |||
| X5 | +2%~+8% | |||
| Ramp | ±4% | |||
| Auto |
Depending on the accuracy at each function Measurement sequence:X1/2 0°->X1/2 180°->X1 0°->X1 180°-> X5 0°-> X5 180° Measurements with X5 aren’t carried out when current is 300mA or more. |
| Continuity / Insulation / Loop / PSC ranges uses the rolling average | |
